Filter
Top Products
21
Model 480i Broadsoft Admin Guide
Setting Parameters through Configuration Files
Firmware Upgrade
The 480i phone uses a TFTP server
to download conÞguration Þles and
Þrmware. The TFTP server should
be ready and be able to accept
connections anonymously (without
a requirement for a user name and
password). See Appendix B for
information on setting up a
TFTP server.
You can download the Þrmware
stored on the TFTP server in one of
two ways, by either resetting the
phone through the options list of
the 480i or by activating a Þrmware
download through the web client.
Resetting the phone will force the
phone to check for both Þrmware
and conÞguration Þles stored on the
TFTP server.
Warning: Do not reset or turn off
the phone until the download is
complete.
From the 480i Phone:
1. Press the £ button to
enter the Options List.
2. Select option 10. Phone Status to
enter the Phone Status option.
3. Select option 3. Reset Phone.
4. Press the Reset softkey to
reset the phone.
5. Press the Cancel softkey to
cancel the current operation.
From the Web Client:
1. Click on the Firmware
sub-category under the ADMIN
main category.
2. Enter the administrator user
name and password (the default
user name is "admin" and
password is "22222").
3. In the Firmware Þeld, enter the
name of the Þrmware Þle that the
phone should be upgraded with,
as shown in the following image.
This name must match the actual
name of the Þrmware Þle residing
on your TFTP server.
4. In the TFTP server IP Þeld enter
the IP address of the computer
where the TFTP server is located.
5. After entering the information
into the appropriate Þelds click
on the "Download Firmware"
button. This will start the
upgrade process. If the upgrade
was successful you will be
presented the following message.