Filter
Top Products
BPG510 User Interface Guide
Country
Select the country the BPG510 is currently operating in.
NTP Server
Enter the Network Time Protocol (NTP) server you want the BPG510 to use to
automatically update the date and time settings. If you don't enter an NTP server, the
time and date stamp on Caller ID messages may not work correctly.
Time Zone
Select the time zone where the BPG510 is currently operating.
Adjust clock for daylight savings
Select this box to have the BPG510 automatically adjust the time one hour for
Daylight Standard Time (DST). If your area does not observe DST, do not enable this
option.
Call Log
The Call Log displays the last 10 calls received or transmitted by the BPG510.
© 8x8 Inc., 2005 Page 23 of 27
DATE/TIME
Displays the date and time of the call.
LINE
Displays the line the call used.
I/O
Displays whether the call was inbound our outbound.
NUMBER
Displays the phone number of the other party to the call.
CALL-ID
Displays the Call-Id header value in the SIP messages. Your service provider