Filter
Top Products
BPG510 User Interface Guide
Router Configuration
Dynamic Routing
Dynamic routing allows the BPG510 to learn routing tables from other network
devices by means of the Routing Information Protocol (RIP). With RIP, network
devices can broadcast messages containing information on the status of network
connections.
RX Mode means we listen to and process RIP messages, TX Mode means we send
RIP information to other routers.
RX Mode
Select
ENABLED to have the BPG510 process any RIP messages it receives from
other network devices. Select
DISABLED to have the BPG510 ignore any RIP
messages it receives.
TX Mode
Select
ENABLED to have the BPG510 broadcast RIP messages to other network
devices. Select
DISABLED to prevent the BPG510 from broadcasting RIP messages.
Static Routing
Static routing lets you configure particular IP addresses to be routed to the LAN port
or the WAN port of the adapter.
Subnet Mask
Page 18 of 27 © 8x8 Inc., 2005
Enter the subnet mask of the destination device.