Filter
Top Products
BPG510 User Interface Guide
Filtered LAN IP Addresses
Enter the IP addresses you want to block from accessing the Internet connection.
Select Both. The computer at the IP address you specified will now be blocked from
Internet.
DMZ Host Configuration
If you want to have one computer on your network receive all un-forwarded data that
arrives at your firewall (for instance, because you want to monitor network traffic on
the WAN side or you have one computer running too many services to configure all
the forwarded ports), you can establish a single computer as a DMZ. Any data that is
not in a port forwarding range will be sent to the DMZ. Follow the steps below to
configure a computer as a DMZ.
CAUTION
The BPG510 cannot protect a computer configured to operate as the DMZ from
malicious access.
© 8x8 Inc., 2005 Page 21 of 27
Traffic sent to the DMZ is still subject to translation by NAT. This means that
applications that are damaged by NAT will still be affected.