Filter
Top Products
BPG510 User Interface Guide
WAN Configuration
The WAN Configuration screen allows you to set the BPG510 to operate with your
DSL/cable modem.
CAUTION
Saving the WAN Configuration reboots the BPG510.
Device Operating Mode
This section allows you to select BPG510 as a switch or a router device. If you
connect BPG
If you are connecting BPG510 as a client behind another router then you will
select BPG510 as a
SWITCH.
Obtain WAN configuration dynamically
Select this option if you do not have a static IP address; the BPG510 will
automatically obtain its IP address and other information from your service provider.
Specify fixed WAN configuration
If your provider gave you a static IP address, select this option and fill out all the
information below:
Page 12 of 27 © 8x8 Inc., 2005
IP ADDRESS
Enter the IP address you received from your service provider in the following
format: XXX.XXX.XXX.X
SUBNET MASK
Enter the subnet mask you received from your service provider in the following
format: XXX.XXX.XXX.X
DEFAULT
Enter the default gateway address in the following format: XXX.XXX.XXX.X This