Filter
Top Products
BPG510 User Interface Guide
GATEWAY
is the IP address of your service provider's router.
DNS ADDRESS
Enter the IP address of the Domain Name System (DNS) server used by your
service provider. Use the following format: XXX.XXX.XXX.X
PPPoE
The WAN PPPoE screen configures the BPG510 to support point-to-point protocol
over Ethernet.
CAUTION
Saving the PPPoE Configuration reboots the BPG510.
Enable PPPoE
Select YES to activate the PPPoE protocol.
Authentication
Enter the
USERNAME and PASSWORD you use to login to the PPPoE service.
Settings
© 8x8 Inc., 2005 Page 13 of 27
Enter the
SERVICE NAME and AC NAME required by your ISP. If you are not sure, leave
this blank.