Filter
Top Products
Chapter 3 Preparing the Cisco CallManager and Octel Systems
Configuring Cisco CallManager
3-8
Cisco Digital PBX Adapter 7630 Administration Guide
78-11069-01
Figure 3-2 Line Configuration for Octel MWI Ports
Configuring the Virtual Port
The DPA 7630 automatically creates and uses the virtual port to send MWI
messages to Cisco CallManager. One virtual port is created regardless of the
number of Octel MWI ports you have. The virtual phone settings are similar to the
Octel MWI port. See Figure 3-2 for an example of the following settings:
• Directory Number—Assign a directory number to this phone.
• Call waiting—We recommend that you disable call waiting on these phones.
• Call forwarding—Do not set.