ZyXEL Communications V500-T1 IP Phone User Manual


 
ENGLISH
9
2.1 Set up Your Network Connection
When you have finished your hardware
connections, look at the LCD screen. The V500
displays your Voice over Internet (VoIP) account
registration status in the tabs on the right, and time
and date details in the top section.
The V500 allows you to configure up to four VoIP
accounts (also known as SIP accounts). When a
VoIP account is not active, Unused displays. When
an account is active but not successfully
registered, No Reg displays in the tab. When an
account is active and successfully registered, the
tab displays the account name (SIP 1 in this
example).
V If the LCD screen displays nothing, recheck your hardware connections.
See section 1.2.
Follow these steps to configure your network settings.
1 Press the Menu key, and use the navigator to
select Advanced Setting. Press Select.
" You can also use the alphanumeric keypad to make your selections in the
LCD screen. For example, you can press the 6 key in the Menu Setting
screen (above) to go to the Advanced Setting screen.
11:45 2008-12-12
SIP 1
Unused
Unused
Unused
ZyXEL
Menu Setting
1 System Info
2 Ring Setting
3 Volume Setting
4 Call Preference
5 Phonebook
6 Advanced Setting
7 System Restart
8 Logo Setting
Select Back