Filter
Top Products
P2302R-P1C Support Notes
All contents Copyright 2007 ZyXEL Communications Corporation.
76
MWI (Message
Waiting
Indication)
Enable
Select this if you want to hear a waiting (beeping) dial tone on your phone
when you have at least one voice message. Your VoIP service provider
must support this feature.
Expiration Time
Keep the default value, unless your VoIP service provider tells you to
change it.Enter the number of seconds the SIP server should provide the
message waiting service each time the ZyXEL Device subscribes to the
service. Before this time passes, the ZyXEL Device automatically
subscribes again.
Fax Option
This field controls how the ZyXEL Device handles fax messages.
G ． 711 Fax
Passthrough
Select this if the ZyXEL Device should use G.711 to send fax messages.
The peer devices must also use G.711
T．38 Fax Relay
Select this if the ZyXEL Device should send fax messages as UDP or
TCP/IP packets through IP networks. This provides better quality, but it may
have interoperability problems. The peer devices must also use T.38
Call Forward
Call Forward
Table
Select which call forwarding table you want the ZyXEL Device to use for
incoming calls. You set up these tables in VoIP > Phone Book > Incoming
Call Policy.
Caller Ringing
Enable
Select the check box if you want to specify what tone people hear when
they call you. The ZyXEL Device provides a default tone
On Hold
Enable
Select the check box if you want to specify what tone people hear when you
put them on hold. The ZyXEL Device provides a default tone
<Back
Click this to return to the SIP Settings screen without saving your changes.
Apply
Click this to save your changes and to apply them to the ZyXEL Device.
Reset
Click this to set every field in this screen to its last-saved value.