Filter
Top Products
P2302R-P1C Support Notes
All contents Copyright 2007 ZyXEL Communications Corporation.
54
Key Settings:
DHCP Setup
If the ZyXEL Device's DHCP server is enabled, the IP pool for the clients can be any of
the three networks.
TCP/IP Setup
Enter the first LAN IP address for the ZyXEL Device. This will create the first route in
the enif0 interface.
Edit IP Alias
Toggle to 'Yes' to enter menu 3.2.1 for setting up the second and third networks.
2. Edit the second and third networks in menu 3.2.1 by configuring the ZyXEL Device's second and third LAN
IP addresses.
Menu 3.2.1 - IP Alias Setup
IP Alias 1= Yes
IP Address= 192.168.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
IP Alias 2= Yes
IP Address= 192.168.3.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
Enter here to CONFIRM or ESC to CANCEL:
Key Settings:
IP Alias 1
Toggle to 'Yes' and enter the second LAN IP address for the ZyXEL Device. This will
create the second route in the enif0:0 interface.
IP Alias 2
Toggle to 'Yes' and enter the third LAN IP address for the ZyXEL Device. This will
create the third route in the enif0:1 interface.