Filter
Top Products
P2302R-P1C Support Notes
All contents Copyright 2007 ZyXEL Communications Corporation.
100
configuration menu under "SYSTEM" and press the Password tab. At the password screen type in the old
password and the new password and retype to confirm than press "Apply" button to save the change.
How do I upload the ZyNOS firmware code via embedded web configurator?
The procedure for uploading ZyNOS via embedded web configurator is as follows.
a. Log on into the web configurator.
b. Press "MAINTENANCE" from the left menu.
c. Press "F/W Upload" tab.
d. Press "browse" button and point to the directory where the firmware you want to upload is kept and
press "Upload" button.
e. It will prompt you the firmware is uploading successful and The ZyXEL Device will reboot.
How do I upgrade/backup the ZyNOS firmware by using FTP client program via LAN?
The ZyXEL Device allows you to transfer the firmware from/to The ZyXEL Device by using FTP program via
LAN. The procedure for uploading ZyNOS via FTP is as follows.
a. To upgrade firmware, use FTP client program to put firmware in file 'ras' in the ZyXEL Device. After
data transfer is finished, the ZyXEL Device will program the upgraded firmware into FLASH ROM and
reboot itself. Note: Do not power off the unit after upload the file via ftp until the system LED have
become steady light up. Fail to due so may result in update fail and require RMA.
b. To backup your firmware, use the FTP client program to get file 'ras' from the ZyXEL Device.
How do I upload or backup ROMFILE via web configurator?
In some situations, you may need to upload the ROMFILE, restore to previous saved configuration, or the
need of resetting SMT to factory default.
The procedure for uploading ROMFILE via the web configurator is as follows.
a. Log on into the web configurator.
b. Press "MAINTENANCE" from the left menu.