Filter
Top Products
Prestige 2000W_V2 Quick Start Guide
5
2 Connecting to a Wireless Network
Press the Power/End key for two seconds to turn on the Prestige. The Prestige searches for the available
wireless network with the best signal. It then restarts and attempts to connect to the wireless network.
If the LCD screen displays Not Registered, the Prestige is connected to the Internet
and you can skip to Section 4.
Note: If the LCD screen displays Registered, skip to Section 5.
If any other message displays or you want to select a specific network, please
continue with the following steps.
12:00
ZyXEL
Not registered
Menu Names
1 In the main screen, press the Left key to enter the menus. 12:00
ZyXEL
Net failed (DHCP)
Menu Names
2 Use the down arrow key to scroll to Wireless and press the OK key.
8. Restart
1. Information
Select Back
3 Use the down arrow key to scroll to Site Survey and press the OK key.
The Prestige checks for and displays a list of available wireless networks and
each one’s signal strength.
2. SSID
3. Network Mode
Select Back
4 Scroll to the name of the wireless network that you want to use and press the
OK key. If a “W” appears next to the network name, or if you know WEP
encryption is required for your network, then continue with Section 2.1,
Otherwise, skip to Section 2.2.
ABC123 90
123ABC 85
Select Back
7. Wireless
1. Site Survey
ZyXEL USA 99 W