Filter
Top Products
Prestige 2000W_V2 Quick Start Guide
12
4.2 Configuring Outbound Proxy Server Settings
If your voice service provider gave you an outbound proxy server address and port, you can enter them here.
You only need to configure the Prestige to use an outbound proxy server if your LAN is behind a NAT router
that does not support SIP.
10 Scroll to Expiry Time and press the OK key.
1. Registrar IP
2. Port
Select Back
11 Use the keypad to enter the expiration time if you were given one to use. Use
the Power/End key to clear the default text and remove typos. Leave the
default expiration time if you were not given one to use. Press the OK key
when you are done.
12 Stay in the SIP Settings menu and continue with the next section.
Expiry Time
300
Ok Aa @ Clear
1 Use the down arrow key to scroll to Outbound Proxy and press the OK key.
3. Proxy Server
4. User Account
Select Back
2 Scroll to Proxy IP and press the OK key.
2. Port
Select Back
3 Select a keypad mode and use the keypad to enter the outbound proxy
server’s IP address or domain name. Use the Power/End key to clear the
default text and remove typos. Press the OK key when you are done.
Proxy IP
my_sip.proxy.com
Ok A 1@ Clear
3. Expiry Time
1
2. OutboundProxy
1. Proxy IP
a