Filter
Top Products
Prestige 2000W_V2 Quick Start Guide
19
Procedure to View a Product’s Certification(s)
1 Go to www.zyxel.com.
2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.
3 Select the certification you wish to view from this page.
“Net Fail!
(DHCP)”
displays.
The Prestige failed to obtain an IP address from a DHCP server.
Make sure your wireless LAN settings are correct. You may need to select a different
wireless network or make sure your wireless network’s DHCP server is operating properly.
Restart the Prestige.
“Net Fail!
(PPPoE)”
displays.
The Prestige failed to obtain an IP address from the ISP.
Make sure your PPPoE settings are correct and restart the Prestige.
“Not Registered”
displays
The Prestige failed to register with the SIP proxy server.
It is still possible to place a direct IP to IP call without the SIP proxy server. You must create
and use a phonebook entry (see Section 5).
Check your SIP settings.
Contact your voice service provider.
PROBLEM CORRECTIVE ACTION