Filter
Top Products
Prestige 2000W_V2 User’s Guide
40 Chapter 4 Network Settings
4.2 DHCP
If you were not assigned a specific IP address for your Prestige, use the following directions to
set your Prestige to get it automatically via DHCP (Dynamic Host Control Protocol).
5 Use the left arrow button to clear the IP address. Use the up and
down arrows to select the type of characters. Enter your IP
address. Use the Left key to select Ok when you are done.
IP Address
192.168.1.3
Ok Aa1@ Clear
6 Select Subnet Mask.
4. Gateway
1. Network Mode
Select Back
7 Clear the subnet mask and enter your’s.The subnet mask
specifies the network number portion of an IP address. Type the
subnet mask given to you by your network administrator. See
the appendix for information on subnetting.
Subnet Mask
255.255.255.0
Ok Aa1@ Clear
8 Select Gateway.
1. Network Mode
2. IP Address
Select Back
9 Clear the gateway IP address and enter your’s.
Gateway
192.168.1.1
Ok Aa1@ Clear
3. Subnet Mask
4. Gateway
1 Select Net Settings in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
5. SIP Settings
6. Settings
Select Back
4. Net Settings