Filter
Top Products
Prestige 2000W_V2 User’s Guide
Chapter 4 Network Settings 39
CHAPTER 4
Network Settings
Use this chapter to configure your Prestige to access the Internet. The Prestige restarts when
you return to the main screen after changing the network settings.
If you were given a user name and password for Internet access, go to Section 4.3 on page 41.
If you were given an IP address and subnet mask, go to Section 4.1 on page 39.
If you were not given an IP address and subnet mask, go to Section 4.2 on page 40.
4.1 Fixed IP
With this option you have to manually enter an IP address, subnet mask and gateway IP
address. These are given to you by the network administrator.
1 Select Net Settings in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
5. SIP Settings
6. Settings
Select Back
2 Select Network Mode.
2. IP Address
3. Subnet Mask
Select Back
3 Select Fixed IP.
[2] DHCP
[3] PPPoE
Select Back
4 Select IP Address.
3. Subnet Mask
4. Gateway
Select Back
4. Net Settings
1. Network Mode
[1] Fixed IP
2. IP Address