Filter
Top Products
Prestige 2000W_V2 User’s Guide
34 Chapter 3 Wireless LAN Setup Menus
3.5 Rate
Do the following to set the transfer rate of the Prestige’s wireless connection to the AP.
3.6 WEP Encryption
WEP (Wired Equivalent Privacy) encryption scrambles all communications transmitted
between the Prestige and the AP to keep them private.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
8. Restart
1. Information
Select Back
2 Select Rate.
6. WEP Select
7. Profiles
Select Back
3 Select Auto to have the Prestige automatically use the highest
rate that the wireless connection to the AP will support.
Select another rate to have the Prestige connect to the AP at
only that rate.
[2] 1M
[3] 2M
Select Back
7. Wireless
5. Rate
[1] Auto
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
8. Restart
1. Information
Select Back
2 Use the up or down arrow and the Left key to select WEP
Select.
7. Profiles
8. Auth Type
Select Back
3 Select the same length of WEP keys as the AP (64-bit or 128-
bit).
[2] 64bit
[3] 128bit
Select Back
7. Wireless
6. WEP Select
[1] None