Filter
Top Products
STORING NUMBERS USING REDIAL
To store the last number dialed into a
permanent memory location, do the
following, from the handset:
The handset should be
OFF.
Press
(m).
The
PHONE
LED
will flash quickly to indicate the unit
is in program mode.
STORING NUMBERS
USING REDIAL
THE HANDSET SHOUl
OFF
PRESS
a
THE PHONE LED WlLl
ENTER MEMORY
LOCATION (00-20)
PRESS
a
PRESS
a
LD BE
.
FLASI
Enter the memory location (00..20)
you wish to store the number in.
press
E~).
Press
MEM
to store the number
and exit program mode. The unit
will emit a happy tone (a series of
short beeps) to confirm successful
programming.
If programming is unsuccessful the
unit will generate an error tone.
DIALING FROM MEMORY
press
(me
or
6)
to
get dial tone.
press
m.
Enter a 2 digit location number
(00..20)
The number stored in that location
will be automatically dialed.
MEMORY DIALING
PRESS@
@
@
@
PRESS-
@
ENTER MEMORY
@
@
a
LOCATION (00-20)
0-0
G3-E3
ri
CHANGING STORED NUMBERS
To change or replace a stored number,
simply store a new number in the
desired memory location following the
instructions listed in
STORING
MEMORY DIAL NUMBERS.
DELETING STORED NUMBERS
To delete a stored number from memory
do the followin from the handset:
Press
&
to enter program
mode.
Enter the memory location (00..20).
Press
@
to exit program mode.
DELETING STORE
@ @
ENTER MEMORY
@ @
a
LOCATION (00-20)
I
I
Stored numbers are retained in memory
even if the base loses its power or the
handset battery is removed.
STORING SPECIAL CODES
To insert a ause in a phone number,
press
(HOLD)
at the appropriate point
when entering the number. This inserts
a
2
second ause. For longer pauses,
press
&
two or more times. Each
press makes the pause
2
seconds
longer, and is treated as a stored digit.
If your phone is connected to a
PBX
you can store the PBX access number
and a pause before the phone number.
For example, to store 9-PAUSE-555-
1234 in memory location 08, do the
following:
Press
fFKZ4
-
Press 08 (memory location)
Press
9
Press
(E)
(pause)
Dial 5551234
Press