Filter
Top Products
PROGRAMMING THE RINGERS
The handset ringer is capable of four
different types of ringer tones. The
following section details how to select
different ringer types and how to turn
off the handset ringer.
CHANGING RINGER TYPES
To program, the handset must be OFF.
To select a different ringer type do the
following:
~ressato pro ram the handset
ringer, or press&to program the
base ringer.
Press:
1
for ringer type
1
2
for ringer type 2
3
for ringer type
3
4
for ringer type
4
Press (p=)or to exit
program mode.
tl5Sa-l
,.nn..n'.n.m'.
-,.,
GER TYPES
TURNING OFF THE RINGERS
To turn off the handset ringer do the
following:
~ressato program the handset
STORING SPEED DlAL NUMBERS
To program a speed dial location, do
the following, from the handset:
0
0
PRESS
O
TO
PROGRAM
THE HANDSET RINGER
I
L
To turn off the base ringer do the
following:
Locate the RINGER ONIOFF switch
on the underside of the base unit,
and set switchto OFF position.
CHECKING THE RINGER TYPE
To hear the present ringer type, do the
following:
-
-
Press (lto program the handset
ringer, or press
a
to program the
base rinaer.
CHECKING THE RINGER
The phone should be OFF .
Press
.
The PHONE LED
will flash quickly to indicate that the
unit is in program mode.
Enter the memory location (00..20)
you wish to store the number in.
Enter the phone number to be
stored, up to a maximum of 20
digits.
~ress(MEM)to store the number
and exit program mode. The unit
will emit a happy tone (a short
series of beeps) to confirm
successful programming and exit
program mode.
If programming is unsuccessful,
the unit will generate an error tone.
STORING MEMORY
DlAL
NUMBERS
THE PHONE SHOULD BE
OFF
PRESS
ENTER MEMORY
LOCATION
(00-20)
ENTER PHONE NUMBER
QUICK MEMORY DIALING
one button access to the MEMORY
DlAL number stored in memory loca-
tion 00. This may be a frequently dialed
friend, business, or emergency number,
such as
91
1.
There are two ways to dial using
The phone number stored in
memory location 00 will be
automatically dialed.
With the phone OFF
,
press
(3iKiEiI
or
~~).
The phone number stored in
memory location 00 will be
automatically dialed after a
2
second delay.
All memory locations including Quick
Memory are not pre-programmed at
the factory. You must program the
ringer