Filter
Top Products
Set-Up
Plug AC adapter into a standard
electrical outlet and Base Unit.
To Mute A Call
Press
(M-)
to disable the
Handset or Base Unit microphone.
Set
TONEIPULSE
switch to
PULSE
or
TONE.
The unit is factory set to
TONE.
Let the handset battery pack charge
for
16
hours before first use.
Connect telephone line cord to base
unit and telephone jack.
Making Calls
Press the
(P=)
key and dial
the number.
OR
Press
(m)
on the Base
Unit, then dial the number.
Answering Calls
To answer a call, ress any key
other than
~,QMuTE),
or the
Volume Keys.
OR
.
Press(m)on the Base
Unit.
Hanging
Press
b
OFF
or place the handset
in the cradle to hang up a call.
To Place A Call On Hold
Press
(=
on the Handset or
Base Unit to place an active call on
(m).
.
To return to the call on the Hand-
set, press
(PHONE).
Press
(MUTE)
again to return to
normal two way conversation.
To Paae The Handset
To a e from the base, press
&&].
To cancel the
PAGE
either press
STORING MEMORY DIAL NUMBERS
From the Handset:
The handset should be
OFF .
Press
(EZZ].
Enter the two digit memory location
(00..20).
Enter the number you wish to
store
,
up to a maximum of 20
digits.
Press
(MEM)
to store number and
exit program mode.
MEMORY STORING
PRESS
@
000
PRESS
a
Memory Dialing (speed Dialing):
MEMORY DIALING
PRESS
@
PRESS
ENTER MEMORY
LOCATION
(00-20)
From the Handset
Press the
(P=@
key.
Press
.
Enter the memory location of the
phone number you wish to dial
(00
...
20). The number will be dialed.
From the Base Unit
Press the
(ma
key.
Press
m.
Enter the memory location of the
phone number you wish to dial
(00..20). The number will be dialed
automatically. The number stored in
memory location
00
can also be
dialed simply by pressing the@=)
key on the Base Unit, or Handset.
Using REDIAL From the Handset:
Press the (m)key, then
(RKQ
to automatically redial
the last number you dialed.
From the Base Unit
:
Press the() key, then
(REDIAL).
HOLD
From the Handset
:
press
(m)
to put a call on hold.
To return to the call, press
(m)
or the
(PHONE)
key.
From the Base Unit
:
Press to put a call on hold.
.
To return to the call, ~ress-
or the
(-E)
key.
EXTENSION
IN
USE
From the Handset:
The IN USE LED will flash slowly
to indicate that another phone
(extension) is being used.
From the Base Unit:
The SP PHONE LED will flash
slowly to indicate that another
phone (extension) is being used.
.
To return to the call on the
speaker hone, ress either-
or
(*).
Hanging Up