VTech VT 9155 Cordless Telephone User Manual


 
31
Your
VTECH VT 9151/VT 9155
cordless
telephone is equipped with a 2.5mm
Headset Jack for use with an optional
accessory Headset for hands-free
operation.
If you choose to use the Headset option,
you must do the following:
INSTALLATION
Obtain an optional accessory Headset,
which is compatible with the
VTECH
VT 9151/VT 9155
.
Please contact VTech Communications
Customer Service, toll-free at 1-800-595-
9511 in US and VTech Electronics at
1-800-267-7377 in Canada for dealer
information in your local area. You can also
purchase a compatible Headset directly
from VTech Communications Customer
Service.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the Handset of your
VTECH VT 9151/
VT 9155
. Connect the plug on the Head-
set to the jack on the cordless Hand-
set. The plug should fit securely. Do not
force the connection. See illustration.
The
VTECH VT 9151/VT 9155
is also
equipped with a detachable belt clip.
Align the pins on the inside edge of the
belt clip with the notches on the side of
the
VTECH VT 9151/VT 9155
handset. The belt clip should snap
securely into place. Do not force the
connection. See illustration.
OPERATION
NOTE: Whenever a compatible Headset
is connected to the cordless Handset, the
microphone on the Handset will be
MUTED. This is done to limit the effect of
background noise.
The following operational characteris-
tics apply to VTech Headsets. The same
may also apply to other (non-VTech)
compatible headsets, but VTech
assumes no responsibility for their
performance.
The VTech brand compatible Headset
has a monaural design which is revers-
ible, so you can wear your Headset on
either the left or right ear, leaving one
ear free for room conversation.
The head band can be adjusted to fit
the contour of your head. Using both
hands, slide the head band up or down
so that it rests comfortably on your
head with the speaker cushion centered
against your ear.
For maximum sound quality, the
flexible microphone should be posi-
tioned at the corner of your mouth, about
one inch from your mouth.
OPTIONAL HEADSET INSTALLATION AND OPERATING INSTRUCTIONS
ON RIGHT EAR
ON LEFT EAR
ONE
INCH
HEADSET JACK &
BELT CLIP
LOCATION