Filter
Top Products
30
Deleting Messages
1. Press “#9” once during message
playback to delete the current mes-
sage.
Note: Playback will pause if “#” or “*” is
entered. ITAD will wait for the command
in the following 2 seconds. If no further
tone is entered, playback will be re-
sumed.
Memo Recording
1. Press “*8”.
2. After selecting the mailbox by entering
command “1”, “2”, “3”, You will hear,
“
Now recording
”, followed by a beep.
3. Enter “#5” to stop recording when you
have finished.
Change OGM Remotely
1. Enter “*7” to record a new OGM. You
will hear, “Now recording” , followed
by a beep to signal start of recording.
2. Press “#5” to stop recording. Your
new OGM will playback automatically.
Check OGM Remotely
Enter “#7” to review OGM. You will hear
playback of OGM followed by a beep.
Turning ITAD ON or OFF
Pressing “#0” toggles the ITAD ON/OFF.
“Answer machine on”, or “Answer
machine off” will be announced, followed
by a beep.
REMOTE OPERATION OF ITAD
Voice Menu for Remote Operation
The system provides two pre-recorded
voice menus to help you during remote
operation. Press “*5” to go back to the
simple voice menu.
The simple voice menu is as follows:
• Press “#1” to play mailbox 1.
• Press “#2” to play mailbox 2.
• Press “#3” to play mailbox 3.
• Press “#5” to stop.
• Press “#4” to repeat the message.
• Press “#6” to skip the message.
• Press “#9” to erase the message.
• Press “*5” for other functions.
The advanced voice menu is as follows:
• Press “#7” to review outgoing
message.
• Press “*7” to record outgoing mes-
sage.
• Press “*8” to record memo.
• Press “#4” twice to repeat previous
message.
• Press “#0” to turn the system on or
off.
• Press “*5” to go back to the simple
voice menu.
Pressing any function code will stop the
voice menu, and perform the corre-
sponding functions.
Exiting Remote Operation
1. Enter “*0” to exit remote operation
mode. The ITAD confirms your action
with a long beep and then discon-
nects.
2. The ITAD also automatically discon-
nects if no key is pressed within 20
seconds during remote operation.