Filter
Top Products
25
MAILBOX X
(1,2&3 ) K
E
REPEAT/SLOW KEY
SKIP/QUICK KEY
MENU KEY
SELECT KEY
TIME/SET KEY
4 rings The incoming call is
answered after 4 rings.
6 rings The incoming call is
answered after 6 rings.
Toll Saver
The incoming call is answered
after 2 rings only if there
are new messages/memos
present. Otherwise, the ITAD
will answer calls after 4 rings.
Thus, if Toll Saver is active and
your ITAD rings 3 times when
you call, you can hang-up to
avoid any long distance
charges.
1. Press MENU until you hear “Set
number of rings.”
2. Press SELECT until you hear the
desired ring number, “2”, “4”, “6”, or
“Toll Saver” announced.
3. Press TIME/SET to confirm your
choice. The selected setting is then
announced.
Leaving a Message (Incoming
Message)
The ITAD will answer a call (according
to the current ring selection), play the
OGM followed by a beep to signal the
start of recording.
• Default mailbox is MAILBOX 1.
• To record the incoming message in
a specific mailbox, the caller should
press “*, X(star X)” during OGM play-
back. X being Mailbox 1, 2 or 3.
• After desired mailbox is selected,
“
Mailbox X, now recording
” will be
announced, and incoming message
recording starts after a beep.
• If incoming message length is less
than 2 seconds, message will not be
recorded.
Listening to Messages / Memos
When new messages and/or new
memos are in the ITAD, the display will
flash the total number of new messages
in all mailboxes.
• Press the desired Mailbox key to
hear messages.
• The system will announce “
Mailbox
X, you have X new message(s) and X
old message(s)
” in the presence of
new message in corresponding
ITAD OPERATION
MAILBOX X
(1,2&3 )
K