Filter
Top Products
29
28
CID-CALLER ID
Special Message Indicators
Out of Area Calls
If for any reason the telephone
number of the caller is unavailable, or
if the caller is outside the CID service
area, the message UNAVAILABLE is
displayed on the LCD.
"Private" Calls
If the caller has exercised the option
to block his or her number from being
sent, then the display will show
PRIVATE.
Transmission Error
If an error is detected, then the CID
information is incomplete and will
not be displayed. "TRANSMISSION
ERROR" will be displayed on the
LCD screen.
The occasional appearance of
"TRANSMISSION ERROR" on your
display does not indicate a problem
with your unit or your telephone line.
However, if this appears frequently,
you may want to notify your telephone
company.
However, when you dial directly from
CID memory, only the last 7 digits of
the received telephone number will be
used. Consequently, you would
actually dial this:
The VTech VT 1922 was designed to
accommodate this situation. If you need
to temporarily add a long dlstance prefix
and /or area code (such as 1503)
before the CID number, do the
following:
• Beginning from the standby mode,
key in the necessary digits. Your
display will look like this:
• Then, to temporarily add the last
7 digits only from a CID memory,
press CID .
• Using the ( ) and (#) keys,
scroll through the received calls
to locate the number you wish to
dial.
• Once you have located the
number you wish to dial, simply
press PHONE . The last seven
digits will be added to the
numbers already in the LCD, and
the whole number shown below
will be automatically dialed.
*
CID-CALLER ID
CID- CALLER ID
Your VTech VT1922 cordless phone
is capable of displaying the name
and/or phone number of the person
calling, before you answer the
phone. Subscription to Caller ID
service through your local phone
company is required to utilize this
feature.
If you subscribe to alphanumeric
(name & number) Caller ID service,
the calling party's name and phone
number (when available) will be
displayed on the LCD screen while the
phone is ringing.
If you subscribe to numeric (number
only) Caller ID service, the calling
party's phone number (when available)
will be displayed on the LCD screen
while the phone is ringing.
CALL WAITING CALLER ID (TYPE
II CID)
Your VTech VT 1922 cordless phone
is also capable of displaying Caller ID
information in connection with a Call
Waiting signal. If you are on a call, and
receive a Call Waiting alert signal, the
LCD will display the name and/or
number (when available) of the party
trying to reach you. As above,
subscription to Call Waiting ID service
through your local phone company is
required in order to utilize this feature.
A WORD ABOUT CALLER ID - CID
Due to regional incompatibilities, Caller
ID information may not be available for
every call you receive. In addition, the
calling party may intentionally block
their name & phone number from
being sent.
NOTE:
You must be in an area where CID
service is available and you must
subscribe to it to use this feature.
If you do not subscribe to the CID
service, the phone will still operate
normally except that the CID
information is not received or displayed.
Receiving and Storing Calls
This unit receives and displays all CID
information, the caller's telephone
number, the callers name and the
exact date and time of the call.
The phone sequentially numbers these
call records and retains them in the
unit's CID memory for later review.
These call record numbers are
displayed as the first two digits in the
display. The unit can store up to 50
numbers in its memory.
Once the CID memory is full, any new
call forces a deletion of the oldest call
record.
DIALING FROM CID MEMORY
NOTE:
Only the last 7 digits of any number
are displayed when dialing from CID
memory.
For example, when you press and hold
the 7 key to view the phone number,
you would see the following: