Filter
Top Products
23
22
ADVANCED FUNCTIONS
Changing Ringer Types
To program, the handset must be
OFF.
To select a different ringer type do
the following:
Press: PROG
Press: #
Press: 1 for ringer type 1
2 for ringer type 2
3 for ringer type 3
4 for ringer type 4
The handset LCD will show the ringer
type selected, for example
Press PROG or OFF to exit.
Turning Off The Ringer
To turn off the ringer do the following:
Checking The Ringer Type
To test the present ringer type, do the
following:
CLR/DEL Key Function
The CLEAR and DELETE functions
can be accessed separately depending
on how long the key is held down. For
example, to clear the last digit entered
on the display, press the CLR/DEL
key for less than 1 second. Press
and hold the CLR/DEL key for more
than 1 second to completely clear the
LCD.
The DELETE function is also used to
delete CID and memory dial records,
see DELETING STORED NUMBERS,
and DELETING NUMBERS.
CHANGING RINGER
TYPES
PRESS
PRESS
PRESS
PRESS
OFF
CHECKING THE RINGER
PRESS
PRESS
PRESS AGAIN
PRESS
ADVANCED FUNCTIONS
CALL WAITING
While you are on a call, you will hear
an alert signal, warning that a second
caller is trying to reach you. CALL
WAITING is a subscription service,
available from most local telephone
service providers. Contact your
provider for details.
If you subscribe to this service linked
with CALLER ID (CID), the name and/
or phone number of the second caller
can be displayed on the LCD
immediately after hearing the CALL
WAITING alert. For more details, see
CID-CALLER ID.
Switching calls using FLASH
• To switch over to the new call,
press the PHONE key; the first call
is put on hold.
• To switch back to the first call,
press the PHONE key again.
Temporary Tone
If you have rotary (dial-pulse)
telephone service (TONE/PULSE
switch is set to PULSE), this feature
allows you to temporarily switch to
TONE dialing for such purposes as
remote access to answering
machines, bank-by-phone services,
use of calling cards and other special
First, dial the call normally. Then
activate the Temporary Tone feature
by pressing TONE (the ( ) key). You
can then press the numbers or
symbols you need, and your phone
will send the proper signals.
To end the call, press OFF or place
the handset back in the base. The
phone will automatically go back to
rotary (dial-pulse) service.
Programming The Ringer
The handset ringer is capable of four
different types of ringer tones. The
following sections detail how to select
different ringer types and how to turn
off the handset ringer.
*
SWITCHING CALLS
TO SWITCH OVER TO
THE NEW CALL
PRESS
TO SWITCH BACK TO
THE FIRST CALL
PRESS AGAIN
PHONE
PHONE
TEMPORARY TONE
DIAL YOUR
NUMBER
PRESS
PRESS THE NUMBERS
OR SYMBOLS
PRESS
OFF
TURNING OFF THE
RINGER
PRESS
PRESS
PRESS
PRESS to exit