19
18
QUICK REFERENCE GUIDE
TO MUTE A CALL
• Press MUTE to disable the
handset microphone.
• Press MUTE again to return to
normal two way conuersation.
TO PAGE THE HANDSET
• To page from the base,
press PAGE .
• To cancel the PAGE either press
PAGE again on the base or press
OFF on the handset.
STORING MEMORY (SPEED) DIAL
NUMBERS:
• The phone should be OFF.
• Enter the number you wish to
store on the LCD up to a maximum
of 20 digits.
STORING
THE PHONE SHOULD BE
OFF
ENTER PHONE NUMBER
PRESS
YOU WILL SEE
ENTER MEMORY
LOCATION (01-20)
SET-UP
• Plug AC adapter into a standard
electrical outlet and Base Unit
• Set Dial Mode switch to PULSE or
TONE. The unit is factory set to
TONE.
• Let the handset battery pack
charge for 16 hours before first
use.
• Connect telephone line cord to
base unit and telephone jack.
MAKING CALLS
• Press the PHONE key. When the
"PHONE ON" indicator is displayed
and you hear a dial tone, dial the
number.
OR
• Enter the number to be dialed on
the LCD and then press the
PHONE key.
ANSWERING CALLS
• To answer a call, press any key
other than OFF , MUTE , or the
Volume Keys. The handset will
NOT auto-answer when lifted off
the base cradle.
HANGING UP
• Press OFF or place the handset
in the cradle to hang up a call.
TO PLACE A CALL ON HOLD
• Press HOLD on the handset
to place an active call on hold.
Press HOLD again to return to
the call.
• Press PROG . The LCD will
display "PROGRAM LOCATION "
• Enter a two digit memory location
(01 .. 20), the unit will store the
number, emit a happy tone to
confirm successful programming
and exit program mode.
THE BASE UNIT LAYOUT
THE BASE UNIT FEATURES
9V DC
TEL. LINE
!
AC POWER JACK
PHONE CORD JACK
+
TONE/PULSE SELECTOR
PAG E
HS IN USE
CHARGING
SPARE BATT
DIGITAL
CORDLESS
900
MHZ
VT1922
MEMORY DIALING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
ANTENNA
MEMORY DIALING DIRECTORY
SPARE BATTERY INDICATOR
HANDSET CHARGE INDICATOR
IN USE INDICATOR
BATTERY COMPARTMENT
PAGE KEY
CHARGING CONTACTS