Filter
Top Products
Press
m,
you're prompted to
enter a speed dial location
number:
Enter a 2 digit location number
(01 -20)
The number stored in that location
will be displayed and immediately
dialed.
Or
Beginning from the OFF mode,
press mfollowed by a 2 digit
location number (01-20).
Press =gain to exit memory
dial mode and leave the number
on the display.
Note that if digits were on the
display prior to entering memory
dial mode, the contents of the
speed dial memory will be ap-
pended to those digits. For exam-
ple, if
1503
was on the LCD and
the conte,nts of the memory
location is 6438981, then the
display would show the following
upon exiting memory dial mode:
Press
(m~),
the number on the
display will be dialed after a 2
second pause.
NOTE:
The ability to temporarily add memory
contents to digits already entered on
the display operates in the same way
for CID and speed dial, memories.
In this way, long distance and area
codes (for example, 1503) can be
entered on the LCD and can preface
numbers recalled from CID memory
before dialing. This is important
because only the last
7
digits of any
number are displayed when dialing
from CID memory.
Changing Stored Numbers
.
To change or'replace a stored number
simply enter the new number on the
display and store it in the memory
location you wish to change.
Deleting Stored Numbers
Press
(MEM).
The display will
change to "SPEED DIAL
LOCATION-
-".
Enter memory location number
(0
1
-20).
Press
(CLEARIDEL)
key. The
display will change to "LOCATION
press mto exit.
NOTE:
Stored numbers are retained in memory
even if the base loses its power or the
handset battery is removed.
Storing Special Codes
YJ
-&,%tXq
To insert a ause in a phone number,
press
&
at the appropriate point
when entering the number on the LCD.
This inserts a 2 second pause. A
"
P
"
appears in the display to show
For longer pauses, press
or more times. Each press
makes the pause
2
seconds longer
and is treated as a stored digit.
If your phone is connected to a PBX,
you can store the PBX access
number and
a
pause before the
phone number. For example, to
store 9-PAUSE-555-1234 in memorv
location 08, do the following:
3.
Dial 5551234
4. Press
(i%iZii$I
5.
Enter 08
Dialing From Memory