Filter
Top Products
,,*WlypRp,-
".
&.-
>"
~~&~A~~G&~J$~~~>$~$-~~{>&~&~~~+
While you are on a call, you will hear
an alert signal, warning that a second
caller is trying to reach you. CALL
WAITING is a subscription service,
available from most local telephone
service providers. Contact your
provider for details.
If you subscribe to this service linked
with CALLER ID (CID), the name
and/
or phone number of the second caller
can be displayed on the LCD
immediately after hearing the CALL
WAITING alert. For more details, see
CID-CALLER ID.
~witchin~'cails using FLASH,N,,_,
L%
-&
2ii.1-_--..
YI_
-
_.
^..L.
To switch over to the new call,
press thep~o~E>ke~; the first call
Is put on hold.
To switch back to the first call,
press theCK~) key again.
SWITCHING
CALLS
000
0
0
a
TO
SWITCH
OVER
TO
TO
SWITCH
BACK
TO
THE
FIRST CALL
PRESS
@
AGAIN
\-,
Message Waiting
Your
VT
1921
is capable of detecting
a Visual Message Waiting Indication,
generated by many phone service
providers. If you subscribe to Voicemail
service from your local telephone
company, and Visual Message
Waiting Indication
is
provided, the VT
1921
will display the following data to
alert you to new, unplayed messages:
Simultaneously, the Message Waiting
indicator on the Base will flash slowly.
Once you have reviewed your new
messages, the MSG. WAITING
indication on the handset, and the
Message Waiting indicator light on
the Base will be cleared.
You can temporarily clear the
Message Waiting screen. With the
Handset in the OFF mode.
Press and Hold
6x3
until the
handset displays:
Press
(CLRIDEL)
to confirm your
decision.
Pressing any key other than
will cancel the operation.
The Message Waiting indicatipn alert
may reappear, as long as unplayed
messages remain in your Voicemail
box.
NOTE:
Message Waiting works in conjunction
with Voicemail service from many
local phone companies. This is an
optional service. You are not required
to subscribe to it.
Temporary,Toneh&&*
U...._
4
YC
s+~~\>&
La>
If you have rotary (dial-pulse)
telephone service (TONEIPULSE
switch is set to PULSE), this feature
allows you to temporarily switch to
TONE dialing for such purposes as
remote access to answering
machines,
bank;by-phone services,
use of calling cards and other special
services.
First, dial the call normally. Then
activate the Temporary Tone feature
by pressing TONE (the
'
key). You
can then press the numbers or
symbols you need, and your phone will
send the proper signals.
To end the call, press or place
the handset back in the base. The
phone will automatically go back to
rotary (dial-pulse) service.
TEMPORARY
TONE
PRESS
THE
NUMBERS
OR
SYMBOLS
Progra,m-ming
:The
Ringer
$
The handset ringer is capable of four
different types of ringer tones
.
The
following sections detail how to select
different ringer types and how to turn
off the handset ringer.
To select a different ringer type do
the following:
CHANGING
RINGER
TYPES
PRESS
@
PRESS
a
PRESS
00
a
PRESS
Press:
(PROd
Press:
a
Press:
1
for ringer type
1
2
for ringer type
2
3
for ringer type
3
4
for ringer type
4
The handset LCD will show the ringer
type selected, for example
Press
(PROG)
or
(OFF)
to exit.
Turning Off The Ringer
Changing Ringer Types