Filter
Top Products
22
Handset Settings
Handset Name (preset as ‘VTECH’)
• It is possible to give each Handset its own
unique name. The name is shown in the first
line when the Handset is idle. The name can
be a maximum of 16 characters in length.
• From the idle (OFF) mode, press SEL then
or key to HANDSET NAME.
• Press SEL again. The display will show the
current setting, for example:
• Press DELETE to backspace then ‘spell’ the
desired name.
NOTE: The characters are entered in the same
way as for the phonebook, see the table on page
15.
• Press SEL to confirm the setting.
Language (preset to English)
• From the idle (OFF) mode, press SEL then
or key to LANGUAGE.
• Press SEL to select this option. Press
or
keys to scroll from English to French or Span-
ish.
• Press SEL to confirm the setting.
Dial Type (preset to Tone)
• From the idle (OFF) mode, press SEL then
or key to DIAL TYPE.
• Press SEL then use
or key to scroll to
TONE or PULSE.
• Press SEL to confirm your setting.
NOTE: When the phone is set for pulse dial mode,
it is possible to switch to temporary tone mode
during an ongoing call by pressing *TONE. Once
pressed, tone will be used for rest of the call.
After you hang up, the phone will return to pulse
dialing for the next call.
Basic Operation