Filter
Top Products
21
Basic Operation
Ringer Volume
• From the idle (OFF) mode, press SEL then
or
key to RINGER VOLUME.
• Press SEL again. The current ringer volume
will be shown:
• Press
or keys or enter digit 0-6 to the
desired ringer volume. The current ring tone is
played and the volume bar is increased/de-
creased each time the setting is adjusted. At
the lowest setting, display will show:
NOTE: The Handset will not ring when a call comes
in if Ringer Volume is set to the lowest setting.
• Press SEL to confirm the setting.
Ringer Tone
• From the idle (OFF) mode, press SEL then or
key to RINGER TONE.
• Press SEL then you are prompted to choose
INTERCOM CALL or OUTSIDE CALL. Press
or keys to select the desired option.
• Press SEL again. You can then use or keys
or enter digit 0-9 to sample the ring tone. The
screen, for example, will show:
• Press SEL to confirm your setting.
Key Tone (preset to ON)
• From the idle (OFF) mode, press SEL then
or key to KEY TONE.
• Press SEL again. The current setting will be
shown. Press
or keys to scroll to ON or
OFF. When set to ON, the Handset will emit a
beep whenever a key is pressed.
• When the desired option is shown, press SEL
to confirm your selection.
Handset Settings