Filter
Top Products
11
Your
VTech 921 ADL
phone is factory set with one of 65536 possible security codes. This
unique security code allows your handset and base to recognize each other, and minimizes
the possibility of another cordless phone using your telephone line. The security code will be
kept even in case of power failure or handset battery being disconnected.
AUTOMATIC SECURITY CODING
TAKING CARE OF YOUR TELEPHONE.
Your
VTech 921 ADL
cordless telephone contains sophisticated electronic parts so it must be
treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to protect your telephone
if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or
handle it with wet hands. Do not install your base unit near a sink, bathtub or shower.
Remember that electrical appliances can cause serious injury if used when you are wet or
standing in water. If your base unit should fall into water,
DO NOT RETRIEVE IT UNTIL YOU
UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL.
Then
pull the unit out by the unplugged cords.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic equipment.
For your own safety, use caution when using electric appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many years. Clean
it only with a soft cloth slightly dampened with water or a mild soap. Do not use excess water
or cleaning solvents of any kind.
MAINTENANCE
you can store the PBX access number and
PAUSE before the phone number. For
example, to store
9-PAUSE-555-1234
in
memory location
8
, do the following:
• Press PROG
• Press 8 (memory location)
• Press 9
• Press HOLD (Pause)
• Enter 555-1234
• Press PROG
MEMORY DIALING (SPEED DIALING)
To dial a phone number stored in memory:
• Press the desired LINE key.
• Press MEM
• Press the memory (speed) dial location
number (0 - 9). The stored phone number
in that location will be dialed.
CONFERENCE CALLING
From The Handset
Once you are on a call (either LINE 1 or LINE
2), press the available LINE key to either
make or answer your second call.
Your original call will automatically be placed
on HOLD.
Press CONF to join both lines together. Both
LINE keys will glow during a Conference call.
ADVANCED OPERATIONS