Filter
Top Products
10
ADVANCED OPERATIONS
RINGER PROGRAMMING
You can select from 4 different Handset ringer
styles for each line. You can also program the
ringer OFF for one or both lines.
Programming The Ringer Type
(The Handset must be OFF)
• Press PROG
• Press *
• Press 1 for LINE 1 or 2 for LINE 2
• Press 1,2,3, or 4 for the ringer styles
• Press PROG to exit program mode
Turning Off The Handset Ringer
(The Handset must be OFF)
• Press PROG
• Press *
• Press 1 for LINE 1 or 2 for LINE 2
• Press 0 to turn off the ringer
• Press PROG to exit program mode
MEMORY (SPEED) DIAL PROGRAMMING
Up to 10 frequently dialed phone numbers can
be programmed into your
921 ADL
's Speed
Dial Memory. Each phone number can
contain a maximum of 16 digits.
To program a phone number into memory, the
Handset must be OFF.
• Press PROG
• Press a number key 0 - 9, representing
the memory location in which you want to
assign to the phone number.
• Enter the digits of the phone number.
• Press PROG to exit program mode.
Replacing a Speed Dial number
If you want to replace a speed dial number,
simply follow the above steps. Your new
speed dial number will replace the previous
one in that memory location.
Programming Using Redial
You may store the phone number currently in
REDIAL
, in a memory location. With the
Handset in the OFF mode:
• Press PROG
• Press a number key 0 - 9, representing
the
memory location
of your choice.
• Press REDIAL
• Press PROG to exit program mode.
Storing A Pause In A Speed Dial Number
To insert a pause in a phone number, press
HOLD at the appropriate point when
entering the number. This inserts a 2 second
pause. For longer pauses, press HOLD 2 or
more times. Each press makes the pause 2
seconds longer, and is treated as a stored
digit. If your phone is connected to a PBX,
POWER LED
CHARGE LED
LINE 1 LED
LINE 2 LED
PAGE KEY
TONE/PULSE
OFF KEY
MEM KEY
HOLD KEY
VOLUME SLIDE SWITCH
LINE 2 KEY
LINE 1 KEY
* TONE KEY
CHAN KEY
PROG KEY
REDIAL KEY
CONF KEY
LOW BATT LED
MEMORY DIALING