Filter
Top Products
22
CALLER ID
Caller ID Setup
When you first plug-in your
VTech 912
ADLc
you will be prompted to perform
several setup procedures.
The setup process is automated. After
confirming a selection, the unit will
automatically move to the next step of
the setup procedure.
The 912 ADLc is capable of displaying
Caller ID information in English,
Spanish, or French. The first message
you will see is:
One second later the LCD will switch to:
Using the scroll keys ( and ) select
the language you want to display. Your
current selection will begin to flash. To
confirm this choice and move to the
next step, press the DEL key.
After selecting the language (assume
ENG was selected), the LCD will then
display the digits of the Time and Date,
and the following message will appear:
Enter Time:
• Using the scroll keys ( and )
select the correct hour (1,2,3,...12).
To confirm your selection press the
DEL key.
• Using the scroll keys ( and )
select the correct minute (0,1,2,...59).
To confirm your selection press the
DEL key.
• Using the scroll keys ( and )
select the either AM or PM. To
confirm your selection press the DEL
key.
Enter Month / Day:
• Using the scroll keys ( and )
select the correct number for the
current month (1,2,3,...12).To confirm
your selection press the DEL key.
• Using the scroll keys ( and )
select the correct number for the
current day (1,2,3,...31). To confirm
your selection press the DEL key.
If you make a mistake during setup you
must restart the setup process. First,
do not press any keys on the unit for
30 seconds. After this time ,the unit
will default to the clock (standby) mode.
To re-enter the setup process, press
and hold both scroll keys ( and )
for 6 seconds.
POWER
IN USE
CHARGING
SPARE
BATT
NEW CALL
DEL
TO SELECT LANGUAGE
TO CONFIRM THE CHOICE
Press
or
Press DEL
POWER
IN USE
CHARGING
SPARE
BATT
NEW CALL
DEL
Press
TO SELECT DATE OR TIME
or
Press DEL
TO CONFIRM THE CHOICE