Filter
Top Products
15
Temporary Tone
If you have a rotary (dial-pulse)
telephone service, (TONE/PULSE
switch is set to PULSE), this feature
allows you to enter special codes and
tones to operate answering machines,
use electronic banking services, calling
cards, or other special services.
First, dial the call normally. Then
activate the Temporary Tone feature by
pressing TONE (the key). You can
then press the numbers or symbols you
need, and your phone will send the
proper signals.
To end the call, press OFF or place the
handset back in the base. The phone
will automatically go back to rotary
(dial-pulse) service.
If you have touch-tone service, (TONE/
PULSE switch set to TONE), just enter
the codes normally. This feature is only
for rotary service telephone lines.
Programming The Ringer Type
The handset ringer is capable of four
different types of ringing tones. The
following sections detail how to change
the different tones and to turn off a
ringer on the handset.
To program, the handset must be OFF.
To select a different ringer type do the
following:
• Press PROG
• Press the # key.
• Press a key 1..4 to select a ringer
type.
• Press the OFF key to exit.
Turning Off The Ringer
To turn off the ringer on the handset,
do the following:
• Press PROG
• Press the # key
• Press 5 to turn off the ringer
• Press the OFF key to exit
• To turn ringer on again, see
Programming the Ringer Type.
900
MHz CORDLESS
IN USE
LOW
BATT
PHONE
CHAN
OFF
2
ABC
1
DEF
3
4
GHI
JKL
5
MNO
6
PRS
7
TUV
8
WXY
9
TONE
*
0
OPER
#
MEM
PROG
REDIAL
3.Press A Number Key
PROGRAMMING
THE RINGER TYPE
4.Press OFF
2.Press # Key
1.Press PROG
1, 2, 3, 4
900
MHz CORDLESS
IN USE
LOW
BATT
PHONE
CHAN
OFF
2
ABC
1
DEF
3
4
GHI JKL
5
MNO
6
PRS
7
TUV
8
WXY
9
TONE
*
0
OPER
#
MEM
PROG
REDIAL
4.Press OFF
3.Press 5
TURNING OFF
THE RINGER
2.Press # Key
1.Press PROG
900
MHz CORDLESS
IN USE
LOW
BATT
PHONE
CHAN
OFF
2
ABC
1
DEF
3
4
GHI
JKL
5
MNO
6
PRS
7
TUV
8
WXY
9
TONE
*
0
OPER
#
MEM
PROG
REDIAL
3.Press The Numbers or
Symbols
1.Dial Your Call Number
TEMPORARY
TONE
2.Press Key
*
OPERATING INSTRUCTIONS