Filter
Top Products
43
FCC and IC Regulations
FCC and ACTA Information
If this equipment was approved for cornection to the telephone network prior
to July 23,2001, it was registered with the Federal Commissions (FCC) in
accordance with Part 68 of its rules. If the equipment was approved after that
date, it complies with the Part 68 rules and with Technical Requirements for
Connection of Equipment to the Telephone Network adopted by the
Administrative Council for Terminal Attachments (ACTA). We are required to
provide you with the following information.
1. Connection and use with the nationwide telephone network
The plug and jack used to connect this equipmet to the premises wiring and
the telephone network must comply with the applicable Part 68 rules and
technical requirements adopted by ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to
a compatible modular jack that is also compliant. An RJ11 jack should normally
be used for connecting to a single line and an RJ14 jack for two lines. See
Installation Instructions in the user's manual. This equipment may not be used
with Coin Telephone Lines or with Party Lines.
2. Product identifier and REN information
The label on the back or bottom of this equipment contains, among other things,
an identifier indicating product approval and the Ringer Equivalence Number
(REN). This information must be provided to your local telephone company
upon request, For equpment approved prior to July 23,2001, the product
identifier is preceded by the phrase "FCC Reg No." and the REN is listed
separately. For equipment approved after that date, the product identifier is
preceded by "US" and a colon (;), and the REN is encoded in the product identifier
as the sixth and seventh characters following the colon. For example, the product
identifier US: AAAEQ03T123XYZ would indicate an REN of 0.3.
The REN is used to determine how many devices you may connect to your
telephone line and still have them ring when you are called. In most , but not
all areas, the sum of all RENS should be five (5.0) or less, You may want to
connect your local telephone company for more information.
3. Repair instructions
If the equipment is malfunctioning, it must be unplugged from the modular
jack until the problem has been corrected. Repairs to this telephone equipment
can only be made by the manufacturer or its authorized agents. For repair
procedures, follow the instructions outlined under the Limited Warranty.
4. Rights of the telephone company
If this equipment is causing harm to the telephone network, the telephone
company may temporarily discontinue your telephone service. The telephone
company is required to notify you before interrupting service. If advance notice
is not practical, you will be notified as soon as possible. You will be given the
opportunity to correct the problem and the telephone company is required to
inform you of your right to file a complaint with the FCC. Your telephone
company may make changes in facilities, equipment, operation, or procedures
that could affect the proper functioning of this product. The telephone company
is required to notify you if such changes are planned.
Additional Information