Filter
Top Products
Base Unit
Ringer Switch
TONE/PULSE
Switch
TEL LINE Jack
DCInput Jack
Handset Retainer
Base Unit
Antenna
Speaker
Microphone
IN USE LED
CHARGE LED
PAGE/INT'COM
Button
Use to set the ring volume level ("LO" or "HI") of the
Base Unit for incoming calls, or the page alert tone level
when paged from the Handset.
Use to select either Tone Dialing or Pulse Dialing.
(Available on Australian Models only)
Plug the supplied telephone line cord into this jack and
the other end of the cord into the standard modular
telephone socket.
Plug the AC Adapter cord into this jack. Then plug the
AC Adapter into a standard wall outlet.
Reverse this retainerto hang up the Handset when the
XC 320 is mounted on a wall.
Collapsible antenna provides maximum range when
fully extended and vertical.
When the Intercom is on, the speaker lets you hear the
person talking to you on the Handset.
Use to talk to the person paging you from the Handset.
Lights when the phone is in use.
Lights when the Handset is in the Base Unit and the
Battery Pack inside the Handset is charging.
Use to page the Handset and activate the Intercom
between the Handset and the Base Unit. When you
press this button, 3 beep tones sound repetitively at the
Base Unit and Handset until the page is answered.
(Note:The Page/Intercom feature does not workif
the phone is in use, or if the Handset RINGONIBATT
SAVEswitch is in the "BATT SAVE"position.)
8