Filter
Top Products
Use for dialing numbers and storing numbers in
memory.
ONE-TOUCH DIAL Special memory locations for storing numbers. Press
Buttons the appropriate button to dial a number.
INT'C Button Use to page the Base Unit and establish communication
between the Handset and the Base Unit. When you
press this button, 3 beep tones sounds repetitively at
the Base Unit and Handset until the page is answered.
(Note: The Page/Intercom feature does not work if the
BASEUNITRINGERswitch is in the "OFF"position or if the
phone is in use.)
FLASH/A. TONE This button has a dual function: (a) When making a call,
Button press to send a timed "hook-flash" on the telephone line
for accessing services such as call waiting, etc. (b)
When the telephone is not in use, press to select one of
two ring tone types.
CHANNEL Button Press to select one of the available channels for
clearest operation. (Note: Operates only when the
phone is in use.)
Numeric Keys
RING ON/BATT
SAVE Switch
MEM Button
ADUP Button
VOLUME/A. VOL.
Button
(On the side of the Handset) Set the switch to "RING
ON"to enable ringing when a call is received. Set the
switch to "BATTSAVE"to save battery energy when the
Handset is not in use. Note: When "BATTSAVE"is
selected, ringing at the Handset is disabled. (The Base
Unit, however, will still ring if the BASEUNITRINGER
switch is set to "LO" or "Hr.)
Use when storing numbers to memory.
This button has a dual function: It redials the last
number dialed, or inserts a pause in memory dialing
sequences.
This button has a dual function: (a) When making a call,
press once to adjusts the volume of the earpiece
speaker (loud or soft). (b) When the telephone is not in
use, press to select the Handset ring volume (high or
Iow).
10