Filter
Top Products
Q
UICK
R
EFERENCE
G
UIDE
INSTALL THE HANDSET BATTERY
Remove the cover.
Connect the battery
pack connector with
the correct polarity.
Replace the cover.
PLUG INTO AC POWER
Plug the AC adapter cord into the base unit and then to
a 120V AC outlet.
Place the handset in the base .
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged, plug the
telephone cord into the base unit and then into a telephone
wall jack.
Your phone is set for tone dialing. If your local network requires
pulse dialing, please see “Setting up the phone, Choose the
dialing mode” in your owner’s manual.
TO SELECT CALLER ID OPTIONS
Press menu/mute.
Press
+ or - to move the pointer to
“
Caller ID Setup”,
then press
select/ch.
Press
+ or - to move the pointer to an option,
then press
select/ch.
Press + or - to change the option setting.
Press
select/ch and return the handset to
the base.
TO CHOOSE THE LANGUAGE
Press menu/mute.
Press
+ or - to move the pointer to
“
Language”, then press select/ch.
Press
+ or - to change the option setting.
Press
select/ch and return the handset to
the base.
Note:
You must charge the battery pack continuous
for 15-20 hours before using the phone.
Note: Three Caller ID options are available:
Auto Talk, Caller ID on Call Waiting (CIDCW)
and Area Code.
Step 1Charging the Battery Step 2 Connecting
Step3 Setting up the Caller ID Options/Language
QUICK REFERENCE GUIDE [ 5]
TRU4465_OM 8/2/02 10:30 AM Page 5