Filter
Top Products
BASICS[ 26 ]
Flash and Call Waiting
If you have Call Waiting service and a call waiting tone sounds
while you are on a call, press talk/flash to accept the waiting
call. There is a short pause, then you will hear the new caller.
To return to the original caller, press talk/flash again.
Voice Mail LED
The voice mail LED on the handset is designed to work with your
voice mail service provided by your local telephone company. The
LED flashes when you have new incoming messages in the voice
mail service.
You may need to occasionally reset the indicator if it remains On
after you’ve retrieved your messages. To reset the indicator, when
the phone is in the standby mode press and hold find handset
on the base until the paging sound stops (about 5 seconds).
You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
With the Speakerphone feature
When the Speakerphone is in use and the handset is on the base, a call will be
transferred to the handset when you pick up the handset from the base.
For the call transfer between the second handset and the handset or the base,
see “Call Transfer Feature” on page 41.
TRU4465_OM 8/2/02 10:31 AM Page 26