Filter
Top Products
BASICS [ 23]
BASICS
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse dialing (sometimes
referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-
over to tone dialing during the call. For example, entering your bank
account number after you have called your bank.
Initially make your call with the pulse dialing mode. Once your call
connects, press
*
tone. Enter the desired number. These digits will be
sent as tone dialing. Once the call ends, the tone mode is canceled and
pulse dialing mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate within
30 seconds.
• The tone feature
only applies when
the dial mode is set
to pulse.
• This special number
can be stored in a
memory location.
This is referred to as
Chain Dialing (See
page 33.)
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the
phone’s channel for clear operation. This function works only when the phone is in use.
Press select/ch. “Scanning” appears on the display, indicating the phone is changing
to another channel. For more information on interference, refer to “Radio Interference”
on page 50.
TRU4465_OM 8/2/02 10:31 AM Page 23