Filter
Top Products
BASICS[ 18 ]
Making and Receiving Calls
• Refer to page 15
“Setting Caller ID
Options” to turn the
AutoTalk feature On if
desired. Any key
answer can be used
only when AutoTalk is
set to On.
• The base microphone
is located under the
base. Position
yourself as near to
the base as possible
and speak clearly.
From the Handset From the Base
To answer a call Handset On the Base Press (talk).
Pick up the handset (AutoTalk)
or pick up the handset and
press
talk/flash.
Handset Off the Base
Press any number key,
*
tone,
or
# (Any Key Answer), or
press talk/flash.
To make a call 1) Pick up the handset. 1) Press (talk).
2) Press
talk/flash. 2) Listen for the dial tone.
3) Listen for the dial tone. 3) Dial the number.
4) Dial the number.
OR
1) Pick up the handset.
2) Dial the number, then
press talk/flash.
To hang up Press
end, or return the Press (talk).
handset to the base
(AutoStandby).
To enter a pause When you dial the number, When you dial the number,
within the press
redial/p before pressing press pause before pressing
dialing sequence
talk/flash. “P” appears in the (talk).
display which represents a pause.
TRU4465_OM 8/2/02 10:31 AM Page 18