Filter
Top Products
51
Pressing Cancel/Del returns to the previous menu. To exit programming and
return the telephone to standby mode, press Menu.
3. Press Select again and enter the Subnet Mask.
The format of the Subnet Mask is:
XXX.XXX.XXX.XXX
\
Numbers 0~255 are valid entries for the Subnet Mask.
4. After the correct Subnet Mask is entered, press Select and restart the
telephone, or press Del/Cancel to cancel restart the phone and continue
setting up the telephone.
• Pressing Cancel/Del returns to the previous menu. To exit programming and
return the telephone to standby mode, press Menu. If Line1, Line2,
Speaker/Headset are pressed or if the handset is picked up, the telephone
goes off-hook and restart is cancelled. When the telephone restarts, the
network settings are not used until after the telephone has been initialized.
• If the Subnet Mask is not valid, “Invalid Input” is displayed for one second
before returning the display to the Subnet Mask menu.
• The new Subnet Mask address is not recognized until the telephone has been
reinitialized. Once the telephone restarts, a restart confirmation message is
displayed on the LCD. “Initializing...\” is displayed in the LCD while the
telephone resets.
Default Gateway IP Address
This option is used to read/write the default Gateway IP address.
To read/write the Gateway IP address:
1. If already in the Network Configuration menu, use the ▲ or ▼ keys to
access the Default Gateway option.
2. Press Select to display the previous Subnet address.
3. Press Select again and enter the Gateway IP address.
The format of the Gateway IP address is:
XXX.XXX.XXX.XXX
Numbers 0~255 are valid entries for the Gateway IP Address.
4. After the correct Default Gateway IP address is entered, press Select and
restart the telephone, or press Del/Cancel to cancel restart the phone and
continue setting up the telephone.
Network Config:
Default Gateway
4/6