Uniden UIP300 Cordless Telephone User Manual


 
14
Connecting the Telephone
Before using UIP300, it is necessary to connect the handset to the telephone
and to connect the telephone to the LAN network.
1. Connect the handset to the handset port located on the left side of
the telephone.
Handset Port
2. Connect the Ethernet cable from the LAN to the network port on UIP300. The
network port is located on the back side of the telephone.
The AC adapter is not included with UIP300. Refer to Chapter 1 “Product
Description”, “Optional & Replacement Equipment” on page 12 for the part
number for the AC adapter.
Do not connect UIP300 to a standard telephone line.
Connection to LAN
(Straight Connection)
AC Adapter
Connection
Figure 2-3 Connecting to LAN
Figure 2-2 Plugging Handset Cord into Telephone
3. If a powered hub is not being used, connect the AC adapter to the power
jack and then connect the adapter to a suitable power outlet.