Filter
Top Products
[ 7 ]GETTING STARTED
GETTING STARTED
B. Install the battery pack
Place the handset on the base unit and charge the battery pack for at
least 15-20 hours before plugging the phone line into your phone.
Battery use time (per charge)
From fully charged:
• 6 hours continuous use.
• 10 days when the handset is in the standby mode.
Low battery alert
If the phone is not in use, “Low Battery” appears on
the LCD and none of the keys will operate. If the phone
is in use, “
Low Battery” flashes and the handset
beeps. Complete your conversation as quickly as
possible and return the handset to the base unit
for charging.
• Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time. For
optimum performance,
be sure to return the
handset to the base
unit after each
telephone call.
• If you must replace the
battery pack during a
telephone call,
complete the
replacement of the
battery pack within
30 seconds, and you
can return to the
original call.
• Use only the Uniden
Battery supplied with
your phone.
Replacement batteries
are also available
through the Uniden
Parts Department
(See page 50) or
www.uniden.com
note
EXT1265 10/1/1 9:24 AM Page 7