Filter
Top Products
[ 67 ]EXPANDING YOUR PHONE
EXPANDING YOUR
PHONE
Intercom/Call Transfer Feature
Intercom and Call Transfer features are available for your phone.
• If the party is busy or out of range, you will hear a beep and the handset returns to
the standby mode.
• If any of the following occurs, the operation will be canceled.
- Press talk/flash or speaker on the handset, and (talk) on the base.
- Receive an outside/intercom call or page (while selecting the other handset).
• When the party does not answer within 1 minute, Intercom or Call Transfer is canceled.
Intercom
From handset to handset or to the base
1) Press intercom/hold in the standby mode.
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the
handset (or the base), press volume/
▲ or ▼, then
press the OK soft key.
If you select “All”, all handsets will be paged.
An intercom tone sounds.
3) On the receiving handset (or the base), to answer the call, press talk/flash,
intercom/hold, or the ANSWER soft key (or int’com/hold or (talk) on the base).
Or press any number key, /tone/
t, or #/s (when Any Key Answer is On), or pick
up the handset from the cradle (when AutoTalk is On).
4) To hang up the intercom call, press the end key or the END soft key on either
handset (or press int’com/hold on the base).
From the base to a handset
1) Press int’com/hold on the base in the standby mode.
2) Select the handset you want to talk with by pressing the number key (1-4).
To page all the handsets press /tone/
t.
3) Follow the steps 3-4 under “From handset to handset or to the base”.
To intercom
Handset #2
Handset #3
BACK BACK OK
DCT5285_UP304BH UP01304BA_1 5/23/03 3:10 PM Page 67