Filter
Top Products
BASICS[ 32 ]
Placing a Call on Hold
1) During a call, press intercom/hold (or int’com/hold
on the base). The call will be put on hold.
• You can hold a call for 5 minutes, when 5 minutes has passed, the call is disconnected and the
phone returns to the standby mode.
• While a call is on hold, CIDCW can not be received.
Once 10 seconds has passed or when you press the end key,
the call will be put on hold.
Hold,to transfer
Handset #2
Handset #3
BACK BACK OK
MENU CID
RDL
PB
Line On Hold
Handset #1
New: 1
Redialing a Call
The last three phone numbers dialed can be quickly
redialed.
Redialing from Standby Mode
1) Press the CID RDL PB soft key in the standby mode.
2) Press volume/
▲ or ▼ to select “Redial History”,
then press the OK soft key. The phone number that
was last dialed appears in the display.
3) Press volume/
▲ or ▼ to toggle through the last
three phone numbers dialed.
4) Press talk/flash or speaker. The selected number
is dialed.
5) To hang up, press the end key.
<Redial1>
8007303456
BACK DELETE
<Redial2>
2145452930
BACK DELETE
<Redial3>
8175551212
BACK DELETE
or
or
• If the number
exceeds 32 digits,
only the first 32
digits are retained
in redial memory.
• If the redial memory
is empty, you will
hear a beep.
• If you have not
pressed any key for
30 seconds, the
phone returns to the
standby mode.
• If you press the end
key, the operation
is canceled.
2) To talk to the caller, press talk/flash or speaker on a
handset (or (talk) on the base). The phone will
return back to the call.
DCT5285_UP304BH UP01304BA_1 5/23/03 3:08 PM Page 32