Filter
Top Products
[7] SETTING UP THE PHONE
www.uniden.com
SETTING UP THE
PHONE
Setting up the Phone
Safety Recommendations
To ensure general safety, follow these guidelines:
• Do not open or disassemble this product.
• Do not expose the product to moisture.
• Do not perform any action that creates a potential hazard to people or makes the
equipment unsafe.
• Ultimate disposal of this product should be handled according to all national laws and
regulations.
• Do not touch the wires on the cable ports or the wires of cables connected to a port as
hazardous voltage may be present on these wires when the equipment is powered on.
• The plug-socket combination must be accessible at all times because it serves as the power
disconnect.
• To avoid electric shock, do not connect the UIP160P to any RJ-11 telephone wall jacks.
This could damage the UIP160P or the telephone wiring in the building.
• Do not work on the system or connect or disconnect cables if lightning or thunder are
present in your area.
• Do not cover or block the air vents on the UIP160P. Overheating can cause permanent
damage to the unit.
• Read the instructions completely before connecting the system to its power source.