Filter
Top Products
[9] SETTING UP THE PHONE
www.uniden.com
SETTING UP THE
PHONE
Check Your Broadband Configuration
The UIP160P supports the two most common broadband connection protocols:
DHCP and PPPoE. If your broadband connection uses DHCP, you do not need to
change any settings on the UIP160P. If your broadband connection uses PPPoE, you
will need to enter your user name and password in step 3. If your broadband
provider has given you a static IP address, you will need to enter that information
in the UIP160P.
See the User Interface Guide at www.uniden.com/voip for more information on
configuring your UIP160P.
STEP 2: Connect Your UIP160P
Once your account is set up, you
can connect your UIP160P.
1) Use the included Ethernet cable to
connect your broadband modem to
the RJ-45 port labeled WAN.
If you use a switch or a router for
your local network, then you can
connect it to the WAN port instead.