MENU
MENU
INST
UNIDEN Model uh095sx Dual Band (UHF CB/AM CB) Radio
Operation
Programming the Instant Priority Channel
Press or to select the Priority Channel you prefer on
either AM or FM.
Press and hold INST button on the microphone for 3
seconds to store the new setting. INST icon appears.
If Dual Watch feature is on the Instant channel will
always be monitored no matter what band or other
channel you are on.
If Priority feature is on the Instant channel will always be monitored no matter
what band or group you are scanning.
Recalling the Instant Channel
Momentarily press the INST button on the microphone at any time to return to the
Instant Channel.
Transmitting
The uh095sx uses the 40 UHF-CB Channels and the 40
AM-CB Channels.
UHF Channels 22 and 23 are for telemetry and
telecommand applications. Transmit is inhibited
on these channels.
Select the desired channel. Press the microphone's PTT
button and speak normally into the microphone. Hold it
approx. 7cm from your mouth. Release the PTT button to
end the transmission and listen for a reply.
Call Function
Press the microphone Call Button. A two second ringing tone will be transmitted.
You may select from 5 types of tones (see below).
Current regulations require calling tones to be restricted to one
transmission per minute. If a second transmission is attempted within one
minute then an error tone will sound.
Selecting the Call tone
Press six times.
Press or to select from call
tones 1-5.
Press and hold /ENTER to store
the new setting.
If a button is not pressed within 10 seconds the uh095sx will
automatically exit the Menu Mode.
8
PTT
CALL