Filter
Top Products
UNIDEN Model uh095sx Dual Band (UHF CB/AM CB) Radio
Operation
Setting the AM Squelch
Select only by pressing .
Turn the outer ring of the control to
adjust the Squelch.
You must select a channel
which is not in use before
setting the SQUELCH
control. (Selecting a Channel
see p7)
AM
Think of the squelch
control as a gate. If you
turn Squelch fully
clockwise it raises the
'Squelch gate' so high that
no signals get through.
If you turn the Squelch
fully counterclockwise it
lowers the 'Squelch Gate'
to the extent that all
signals get through -
weak, medium and strong
signals and noise.
To set the 'Squelch Gate'
to the desired level, turn
the squelch knob
counterclockwise until you
hear noise. Then carefully
turn the Squelch knob
clockwise until the noise
stops. Now only strong
signals get through.
6
AM/FM
AM/FM
Selecting AM or FM or Dual AM+FM Band
Turn the uh095sx ON by rotating the
volume control clockwise.
By pressing you may select
which band the uh095sx will receive
and transmit on. When only is
displayed the uh095sx will transmit
and receive on AM CB channels
which is HF Band. When only is
displayed transmit and receive will
be on UHF CB channels. When both
and are displayed either
or will flash reflecting the
band that the uh095sx is currently on.
AM
FM
AM FM
AM FM